DIRT TRACK WORLD'S TRICKEST NUMBER PLATE MOUNTS

Here is a trick way to mount your front number plate on your fork tubes. 2 x 1" machined mounting blocks are drilled with three No. 10 threaded holes-you can use one or two Allen cap screws (included) per side for mounting. These are designed for vintage 35mm forks but Omar's can have them made for up to 40mm forks for you. Thick 3/16" o-rings wrap around your fork tubes and prevent the blocks from sliding up and down the fork tubes. Number plate is positioned off the tubes by 1/4". They are trick and very light weight. And they go from bike to bike to bike. Included;

2 blocks
4 #10 Allen cap screws
4 3/16 O-rings


	Here is a trick way to mount your front number plate on your fork tubes. 2 x 1" machined mounting blocks are drilled with three No. 10 threaded holes-you can use one or two Allen cap screws (included) per side for mounting. These are designed for vintage 35mm forks but Omar's can have them made for up to 40mm forks for you. Thick 3/16" o-rings wrap around your fork tubes and prevent the blocks from sliding up and down the fork tubes. Number plate is positioned off the tubes by 1/4". They are trick and very light weight. And they go from bike to bike to bike. Included; 2 blocks 4 #10 Allen cap screws 4 3/16 O-rings
	HOME \| STREET TRACKER \| DIRT TRACK \| CAFE \| MANX \| BMW \| CLUBMAN VINTAGE FLAT TRACK \| BARS \| FAIRINGS \| REAR SETS \| EXHAUSTS \| VINTAGE GRAPHICS LINKS \| COOL USED STUFF \| CUSTOMER GALLERY \| CONTACT/INFO \| NEW